Products & Solutions
Electric Vehicle Supply Equipment ATS
Preen's EVSE ATS is designed for verification of AC and DC EV chargers, which comply to regulation of SAE-J1772 and CNS15511, NB/T33001, NB/T33002, NB/T33008.1 and NB/T33008.2, GB/T 18487.1 and GB/T 27930; and Interoperability test specifications ofelectric vehicle conductive charging.
This system mainly provides electric performance test and communication protocol test for AC and DC charger, integrating the testing items of related standards to optimize testing efficiency. It can simulate the output and communication operation of the charger to test whether the magnetic field generated by the high-capacity transmission will interfere with the communication. And it also can simulate the corresponding protection of the charger when the signal of control pilot changes during the charging process.
Inquiry
-
Overviews
-
Key Features
-
Documentation
-
Videos
Electric Vehicle Supply Equipment ATS
Preen's EVSE ATS is designed for verification of AC and DC EV chargers, which comply to regulation of SAE-J1772 and CNS15511, NB/T33001, NB/T33002, NB/T33008.1 and NB/T33008.2, GB/T 18487.1 and GB/T 27930; and Interoperability test specifications ofelectric vehicle conductive charging.
Preen's EVSE ATS is designed based on the type and regulations of EV charger in various countries. Not only meeting multiple testing standard of EV charger, EVSE ATS also provides flexibility in system design. It can be configured according to the customer's requirement or existing instruments, and automatically generates test results and reports. EVSE ATS is equipped with Preen's high-power AC sources and loads, featuring various models and power levels, providing a cost-effective and reliable testing solution.
Preen's EVSE ATS testing software platform is designed as an open and flexible structure, the user can set different criteria to each testing item and make adjustments according to different instruments. It can also interpret PASS/FAIL automatically and generate test results in the form of reports. The user can set Security Level, Full System Access, Edit Setups and Recall Setups in system setting page.
Preen's EVSE ATS can combine with AFV+ series High Power Programmable Power Supply (10kVA~2000kVA) or PAS series Regenerative Grid Simulator (30kVA~2000kVA) for powering single-phase/three-phase input of charger. These two products can provide voltage / frequency / current testing for EV charger from various countries, and simulate overvoltage, undervoltage and related protection testing.
EVSE ATS is an automatic testing system aimed for AC and DC charger regulation, which comply to regulation of SAE-J1772 and CNS15511, China National Energy Administration standard NB/T 33001, NB/T33002, NB/T33008.1 and NB/T33008.2, China National standard GB/T 18487.1 and GB/T 27930, and Interoperability test specifications of electric vehicle conductive charging. It helps to shorten the product testing process for product line, quality assurance and R&D.
Comparing to other EV charger testing systems on the market, Preen's testing system not only complies with international regulations, it also provides automation testing for insulation, voltage-withstand and leakage current, greatly improved the efficiency of product line and quality assurance process.
- Complied with relevant national regulations: NB/T 33001, NB/T33002, NB/T33008.1, NB/T33008.2, GB/T 18487.1, GB/T 27930, SAE-J1772 and CNS15511.
- Ideal for high-power charger testing : equipped with Preen's high power AC sources and loads, featuring various models and power levels.
- Flexible system configuration: can be customized for customer's need.
- Suitable for various EV charger sockets.
- Simulate the corresponding protection of the charger when the signal of control pilot changes according to each working conditions.
- Capable to perform touch current insulation testing.
- Intuitive control software, easy to use.
-
EVSE ATS Introduction