AFV-P Series Programmable AC & DC Power Supply
  1. >
  2. >

Preen (AC Power Corp.) will release the latest AFV-P series AC power supply. AFV-P series is a programmable AC power supply with DC output and precision measurement. This AC power supply with high power density comes in four power levels, 600VA, 1250VA, 2500VA and 5000VA, providing clean power with distortion less than 0.3% at 50/60Hz. The AFV-P series can deliver output voltage from 0VAC to 310VAC and output frequency from 40Hz to 500Hz (opt. 15 Hz to 1000Hz).

AFV-P series has total 1200 test steps in 50 built-in memories and transient generation function, which support users to simulate various states of power line disturbance. Additionally, users can also set up start/end phase angle from 0 to 360 degrees. With the latest PWM technology, the AFV-P series is capable of delivering up to 4.5 times of peak current from its maximum rated current, which makes it ideal for inrush current test. As mentioned above, AFV-P series is ideal for industries related to electronics, electrical engineering, renewable energy, defense and aerospace from design verification, quality assurance, ATE to mass production.


Complete Interface Options:


Wide Output Voltage & Frequency:

Output frequency is continuously adjustable from 15Hz to 1000Hz, which is ideal for aerospace and defense industries

STEP & RAMP Test:

The AFV-P series offers an easy and convenient method to execute a single step or continuous output changes. The sweep function is ideal for voltage and frequency variation tests. The response time of voltage and frequency changes are within one cycle. User can also use the ramp function to adjust slew rate of voltage and frequency changes. Ramp function can also effectively reduce the inrush current during motor startup.

AC Source with DC Output:

Extend the applications to DC type testing.

Current Foldback Feature:

Current foldback feature will have output current maintain constant based on the load while output voltage varies.

Transient Generation:

Transient generation is an extended feature that provides the users an easy setup for power line disturbance simulation. Common waveform disturbances such as surge, sag, spikes, and dropouts can be generated for application like immunity test.

Intuitive Touch Panel:

Users can quickly select the parameters via 5 inches touch panel or rotary knob, which provides an easy operation and measurement display.

Control Software:

AFV-P series provides control software and Labview driver that allow users to easily setup the remote control for the power supply without further need of programming.

Start/End Angle & High Peak Current for Inrush Current:

AFV-P Series is capable of providing high output peak current (max. 4.5 peak/rms), and this feature makers it ideal for inrush current happened in motor testing. Users can also define the start and end phase angle from 0° to 360°, which is suitable for switching power inrush testing.
  • PAS series
    PAS
  • ADG series
    ADG
  • Customized Product Service
    Customized
    Products
More Informations:Preen ac power supply manufacturerprogrammable ac source application